Audiovox VBPEX56 Owners Manual - Page 8
Monitor on. The POWER LED will - monitor cable for
UPC - 044476008245
View all Audiovox VBPEX56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
signals, power (12 Volt DC ) and Infrared control signals are routed through the DIN cable to the Monitor. Since the Monitor is deriving power from the VBP3000/ VBP4000, there is no need for a power source to be connected to DC 12V IN jack located on the Monitor. NOTE: If connecting the Monitor to the VBP4000 be certain to slide the TV/VCP select switch located on the face of the Monitor to the VCP position. H. Using External Audio/Video Sources (Refer to Figure 8) Connect the VBPEX5 to an external power source. Refer to Figure 4 and Figure 5. Plug the external source audio/video signals into the appropriate jacks on the side of the Monitor. Plug the video output from an auxiliary source such as Camcorder, Video Game, DVDPlayer,VideoCassettePlayeretc.intotheyellow Video In jack. Plug the left audio signal into the white jack. Plug the right audio signal into the red jack. Figure 8 I. Using Headphones (Refer to Figure 8) Optional wired headphones may be used with the Monitor. Simply plug in the headset to the headphone jack on the side of the Monitor and both internal speakers will be turned off. J. Operation (Refer to Figure 3) 1.Slide the POWER ON/OFF switch to the on position to turn the Monitor on. The POWER LED will light. 2.When connecting the VBPEX5 Monitor to the VBP3000, slide the TV/ VCP switch to the appropriate position for selecting the TV or VCP mode. 7