Audiovox VD1400HT Owners Manual - Page 21
To select the listening channel
View all Audiovox VD1400HT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Adjusting the Sound To select the listening channel 1. When the disc is stopped, you can press 5.1 CH and 2.1 CH buttons on the remote control to select different speakers output status shown as below table. 2. You can active or off subwoofer output by setup menu. Note: The wording "2.1 CH" will be corresponded to the audio/sound output from Front Left and Front Right speaker plus the Subwoofer. The following tables show which speakers are working in the various modes. DISC DVD CD MP3 Audio Settings 5.1 CH / Subwoofer L/R 2.1 CH Speaker 5.1 CH 5.1 CH 2.1 CH 2.1 CH N/A N/A ON OFF ON OFF ON OFF Small Large Small / Large Small / Large Small / Large Small / Large Small / Large Front Left Speaker Speakers Output Status Front Right Center Subwoofer Rear Left Speaker Speaker Speaker X X X X X X X X X X X X Rear Right Speaker X X X X Sources TUNER VCR / AV_IN Output Channel N/A 4 CH 3 CH 2 CH Audio Settings Speakers Output Status 3 Stereo / Pro Logic N/A Pro Logic 3 Stereo OFF Subwoofer N/A ON ON OFF ON ON OFF ON OFF L/R Speaker N/A Small Large Small / Large Small Large Small / Large Small / Large Small / Large Front Left Front Right Speaker Speaker Center Speaker X X X Subwoofer X X X X X Rear Left Rear Right Speaker Speaker X X X X X X X X X X X X REMARKS: 1) Generally, only Front Left, Right speakers and Subwoofer are active at TUNER mode. 2) " " The speakers is activated. 3) " X " The speakers is not activated. 4) Always keep your VCR in stereo mode otherwise the speakers output status may be different to above listed table. 5) You can only set 5.1 CH, 2.1 CH when the disc is stopped. 6) In Subwoofer On mode, if speaker is set to "Large", then the output of subwoofer is low. - 20 -