Audiovox VDS102T Operation Manual - Page 6

Controls Function Descriptions 1. Infrared Sensor - Allows the remote control to operate the VDS102T and to control the DT102 when docked. 2. Three position Dome Light Switch • Auto - Automatically switches on the dome lights in conjunction with the vehicle's interior illumination. • Off - The dome lights will not turn on in this position. • On - Turns on the dome lights. 3. Dome Lights - Provide additional interior illumination. 4. Channel (5) Button - Used this button to increase the channel number to the desired number. 5. Channel (6) Button - Used this button to decrease the channel number to the desired number. 6. Auto Program Button - Allows the user to scan and store active TV stations into memory. 7. Screen Release - Moves in the direction of the arrow to release the drop down screen. 8. Shuttle Shut-off Switch - Turns off the DT102 when closed. 9. Security Lock Knob - Used to ensure that the shuttle is not released accidentally. 10. 24 Pin Signal Interface Connector - Used to connect the shuttle to the docking station. 11. Shuttle Release - Press to release the shuttle from the docking station. 12. POWER Button - Used to turn the system ON/OFF. Bright red when system is on, dim when off. 13. FMM Select Button - When this button is pressed it will turn on the wireless FM Modulator and then cycle through the available FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz). 14. Source Select Button - Used to select one of the three sources (DVD, AV1, TV) 6