Audiovox XSN1V1 User Guide - Page 37

To replace an FM preset assigned to a number button: 1 Press FM on the top of Snap. The FM icon is displayed on the screen to indicate the Radio is in FM mode, and the display will show the current FM channel. 2 Turn the Rotary knob to tune to the desired FM channel. 3 Press and hold the number button between 1-5 that corresponds to the FM channel you want to replace. The message Replace? Press Again will be displayed on the screen. 4 Press the number button again. The corresponding number icon will FM be displayed on the screen confirming that the new FM preset has Replace? replaced the old FM preset. Press Again 5 To exit, press FM or wait 10 seconds until Snap exits to the main display screen. IMPORTANT! You need to ensure that your vehicle's FM radio is tuned to the same FM channel. TIP! Be sure to complete any FM functions while the FM icon is displayed on the screen. TIP! To configure your preset FM channels, you need to find available FM channels in your area. Follow step 1 in "Option 3: PowerConnect Installation Instructions" on page 25 to find available FM channels 37