Avanti D110-1IS Instruction Manual - Page 6
Wall Mounting Instructions, It is recommended to complete the following procedure with at least 2
View all Avanti D110-1IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Wall Mounting Instructions ** It is recommended to complete the following procedure with at least 2 people ** Tools Required Tools and parts Drill & Drill Bit 1 required for Plaster Phillips Head Screw Driver 1 and or Wood Wood screws 2" long 4 Installation Wall Mounting Kit Includes the following: Description Wall Hanging Bracket 2 Wall Hanging Hook 2 Plastic Spacers 2 Exhaust Pipe 4 (Pieces) a) Determine the position where you will be installing the mounting bracket. (This dryer is not designed to sit directly on top of your washing machine). (A minimum of 2 inches in required between the top of the dryer and the ceiling to allow easy installation and adequate space for exhaust). (If mounting above a washing machine, allow sufficient spacing to open the lid of the washer or breathing room in the case of a front loading washer). b) Affix the wall mounting bracket (included) securely to the wall (directly to the stud). (If a stud is not available, use a wooden slat between the studs to mount the bracket) c) Install the Wall Hanging Hooks as shown in illustration (Fig. 2). d) Install the exhaust pipe as shown in illustration (Fig. 3). (Installation hardware included) • For a downward exhaust join the sections (1) pointing downward. • For an upward exhaust join the sections (1) pointing upward. e) Mount the dryer on the wall bracket as shown in illustration (Fig. 4). ** It is recommended that this step be done by two (2) or more persons ** 6