Home » Avanti Manuals » Ice Machines » Avanti IM12IS » Manual Viewer

Avanti IM12IS Instruction Manual

Avanti IM12IS Manual

View all Avanti IM12IS manuals

Add to My Manuals
Save this manual to your list of manuals

Avanti IM12IS manual content summary:

Avanti IM12IS | Instruction Manual - Page 1
ICE MAKER/MAQUINA DE HACER HIELO INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES Model Number / No. de Modelo: IM12-IS BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. La sección en español empieza en la página 14. Avanti has a policy of continuous improvement on its
Avanti IM12IS | Instruction Manual - Page 2
Ice-Maker Safety Important Safeguides Help Us Help You Parts and Features Important Safety Instructions Installation Instructions Ice from Ice-bin Care and Maintenance Cleaning Your Appliance Space Requirements Power Failure Troubleshooting Guide Service for Your Appliance Wiring Diagram Your Avanti
Avanti IM12IS | Instruction Manual - Page 3
ICE MAKER SAFETY YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT. We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages. This is chance of injury, and let you know what can happen if the instructions are not followed. 3
Avanti IM12IS | Instruction Manual - Page 4
this manual. All other servicing should be referred to a qualified technician. FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL • the factory, due to long-term transit and storage, the first batch of cubes must be discarded. • Do not use solvent-based cleaning agents of abrasives
Avanti IM12IS | Instruction Manual - Page 5
the dealer (or builder) that sold you the ice maker. Save time and money. Before you call for service, check the troubleshooting guide. It lists causes of minor operating problems that you can correct yourself. If you need service We're proud of our service and want you to be pleased. If for
Avanti IM12IS | Instruction Manual - Page 6
PARTS AND FEATURES 1 ICE SCOOP 2 ICE FULL SENSOR 3 ICE BASKET 4 TOP WITH CONTROL PANEL 5 AIR VENT 6 WATER DRAIN PLUG 7 MAXIMUM WATER LEVEL MARK 6
Avanti IM12IS | Instruction Manual - Page 7
sure you have all of the following parts: • 1 Instruction Manual • Before connecting the ice maker to the power source, let it stand upright for certified electrician or an authorized Avanti products service center. IMPORTANT: Do not install the Ice maker near an oven, radiator, or
Avanti IM12IS | Instruction Manual - Page 8
use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which
Avanti IM12IS | Instruction Manual - Page 9
the word POWER will illuminate green when the unit is turned on. ICE SIZE INDICATOR (GREEN) (S) small or (L) large. The indicator above the selected cube size will be illuminated green. ADD WATER INDICATOR (RED). The ice maker automatically checks the water level in the tank. If the water level
Avanti IM12IS | Instruction Manual - Page 10
Instructions Starting your Ice maker • Open the top cover and remove the ice basket. • Remove any dust or objects that may be in the water tank • Fill the water tank up to the area marked "MAX": • Select desired ice cube size by pressing the "ice size" selector (Small or Large). • The ice-maker
Avanti IM12IS | Instruction Manual - Page 11
appliance. PROBLEMS WITH YOUR ICE MAKER? You can solve many common ice maker problems easily, saving you the cost of a possible service call. ice making cycle are right but no ice is made. TROUBLESHOOTING GUIDE Possible Cause Suggested Solutions The voltage is lower than Stop the ice maker
Avanti IM12IS | Instruction Manual - Page 12
organization and the network of professional service technicians that provide service on your Avanti ice maker. With the purchase of your Avanti ice maker, you can be confident that if you ever need additional information or assistance, the Avanti Products Customer Service team will be here for you
Avanti IM12IS | Instruction Manual - Page 13
written instructions in this manual. Avanti Products panels, door rails and/or door supports. • Light bulbs and/or service calls, tolls, ferry trip charges, or mileage expenses for service calls to remote areas, including the state of Alaska. • Service calls that are related to external problems
Avanti IM12IS | Instruction Manual - Page 14
interno y externo. • Verifique que haya recibido las siguientes piezas: • 1 Manual de Instrucciones • Antes de conectar la máquina de hacer hielo a la un electricista certificado o a un centro de servicios autorizado por Avanti Products. IMPORTANTE: No instale la Máquina de hacer hielo cerca
Avanti IM12IS | Instruction Manual - Page 15
DEL ENCHUFE A TIERRA PUEDE OCASIONAR RIESGO DE UN CHOQUE ELECTRICO. SI EL CORDON SE DAÑASE, LLEVELO A UN CENTRO DE SERVICIO AUTORIZADO POR AVANTI PRODUCTS PARA QUE SE REEMPLACE. • Para su seguridad, esta máquina de hacer hielo debe estar apropiadamente conectada a tierra. El cordón eléctrico de
Avanti IM12IS | Instruction Manual - Page 16
Botón para encender / apagar la unidad Botón para seleccionar el tamaño del hielo ON / OFF (Encender / Apagar) Presione para encender o apagar la unidad. Ice Size / Tamaño del hielo SELECCIÓN DE TAMAÑO DEL HIELO hay dos tamaños: (S) pequeño o (L) grande. El tamaño pre-programado en la fabrica es
Avanti IM12IS | Instruction Manual - Page 17
. • Cuando los cubos de hielo se van almacenando y llegan al tope del sensor, la máquina de hacer hielo detendrá el funcionamiento y el indicador de ICE FULL (CICLO COMPLETO) se encenderá. • Hay dos tamaños de cubos de hielo para su elección, por lo tanto, mientras más grande sea el tamaño deseado
Avanti IM12IS | Instruction Manual - Page 18
 Requerimientos de espacio • El ángulo de inclinación de la unidad durante el transporte no debe exceder los 45° • No ponga la máquina de hacer hielo de cabeza ya que esto puede producir problemas en el compresor y el sistema sellado. • La máquina de hacer hielo debe ser colocada sobre una
Avanti IM12IS | Instruction Manual - Page 19
, A Division of The Mackle Co., Inc. P.O. Box 520604 - Miami, Florida 33152 USA  PROTECT YOUR PRODUCT: We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft.  PROMOTE
Avanti IM12IS | Instruction Manual - Page 20
Ver-IM12-IS - 2.0 - 05202011 20 PRINTED IN CHINA

Section	Page
Help us help you…	5
PARTS AND FEATURES	6
1	6
ICE SCOOP	6
5	6
AIR VENT	6
2	6
ICE FULL SENSOR	6
6	6
WATER DRAIN PLUG	6
3	6
ICE BASKET	6
7	6
MAXIMUM WATER LEVEL MARK	6
4	6
TOP WITH CONTROL PANEL	6
IMPORTANT SAFETY INSTRUCTIONS	7
INSTALLATION INSTRUCTIONS	7
 Before Using Your Ice Maker	7
 Installation Of Your Ice Maker	7
 ELECTRICAL CONNECTION	8
 EXTENSION CORD	8
 SURGE PROTECTOR	8
OPERATING YOUR ICE MAKER	9
CARE AND MAINTENANCE	10
 Cleaning Your Ice Maker	10
 To ensure the cleanliness of the ice cubes, water in the reservoir should be replaced every 24 hours.	10
 Remove the drain plug to drain remaining water from the water reservoir when the ice maker will not be used for long period of time. Screw the drain plug back in place after the water has been drained.	10
 Always change with fresh water before starting ice production at initial installation or after long shut-off periods.	10
 Please clean your Ice maker regularly. When cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and vinegar to clean the inside and the outside surface of the Ice maker. Do not spray Ice maker with chemicals or diluted agents such as acids, gasoline or oil. Rinse thoroughly before starting.	10
 Space Requirements	10
 During transportation, the incline angle of the cabinet should not be over 45°	10
 Do not turn the Ice maker upside down. Problems could occur in the compressor and sealed system.	10
 The Ice maker should be placed horizontally on a properly leveled surface.	10
 To ensure proper ventilation for your Ice maker allow 6” of space at the top, the back and on each side.	10
 Before using the Ice maker for the first time, please wait 2 hours after positioning it.	10
 Clean the inner liner, ice-bin, water box, water cup frequently.	10
 Power Failure	11
TROUBLESHOOTING GUIDE	11
Service For Your Ice Maker	12
YOUR AVANTI PRODUCTS WARRANTY	13
MEDIDAS DE PRECAUCION IMPORTANTES	14
INSTRUCCIONES DE INSTALACION	14
 Antes de usar su Máquina de Hacer Hielo	14
 Instalación de su máquina de hacer hielo	14
 Conexión Eléctrica	15
 Cable de Extensión	15
 Protector contra variaciones de corriente eléctrica (Surge Protector).	15
OPERANDO SU MÁQUINA DE HACER HIELO	16
CUIDADO Y MANTENIMIENTO	17
 Limpiando su máquina de hacer hielo	17
 Para asegurar la higiene en los cubos de hielo, el agua del tanque debe ser reemplazada cada 24 horas.	17
 Cuando la máquina de hacer hielo no sea usada por un periodo de tiempo largo, retire el tapón del drenaje para que el agua remanente del tanque sea descartada. Coloque el tapón del drenaje nuevamente en su sitio después que toda el agua haya sido drenada.	17
 Siempre use agua fresca antes de empezar la producción de hielo durante la instalación inicial o después de largos períodos de inactividad.	17
 Por favor limpie su máquina de hacer hielo regularmente. Cuando la limpie, desconecte la unidad de la electricidad y retire los cubos de hielo. Use una solución diluída de agua y vinagre para limpiar el interior y el exterior de la superficie de la máquina de hacer hielo. No rocíe la máquina de hacer hielo con substancias químicas o agentes diluídos, tales como ácidos, gasolina o aceite. Enjuague bien antes de empezar el funcionamiento.	17
 Requerimientos de espacio	18
 El ángulo de inclinación de la unidad durante el transporte no debe exceder los 45°	18
 No ponga la máquina de hacer hielo de cabeza ya que esto puede producir problemas en el compresor y el sistema sellado.	18
 La máquina de hacer hielo debe ser colocada sobre una superficie correctamente nivelada.	18
 Para asegurar ventilación apropiada para su máquina de hacer hielo, deje 6” de espacio encima de la superficie, la parte posterior y los lados.	18
 Antes de usar la máquina de hacer hielo por primera vez, por favor espere 2 horas después de colocarla en su posición final.	18
 Limpie la superficie interna, el contenedor del hielo, el tanque de agua y el reservorio para rellenar el tanque de agua con mucha frecuencia.	18
 Falta de electricidad	18
GUIA PARA RESOLVER PROBLEMAS	18
REGISTRATION INFORMATION	19