Avanti IM12IS Instruction Manual - Page 9
Operating Your Ice Maker - cube ice maker
View all Avanti IM12IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPERATING YOUR ICE MAKER Control Panel Description A CUBE SIZE INDICATOR LIGHTS B POWER INDICATOR LIGHT C ICE-FULL INDICATOR LIGHT D WATER SHORTAGE INDICATOR LIGHT E POWER ON / OFF BUTTON F CUBE SIZE SELECTOR BUTTON Ice Size ICE SIZE SELECTION of (S) small or (L) large. The default cube size from the factory is set at LARGE. Each time you press this button the cube size selection will change between Small and Large. The chosen mode shall stay as selected unless changed or there is a power failure. For the most efficient operation when ambient temperature is below 15°C (59ºF) use the small cube size setting. LED INDICATORS POWER INDICATOR (GREEN) The indicator above the word POWER will illuminate green when the unit is turned on. ICE SIZE INDICATOR (GREEN) (S) small or (L) large. The indicator above the selected cube size will be illuminated green. ADD WATER INDICATOR (RED). The ice maker automatically checks the water level in the tank. If the water level is too low the indicator will illuminate in RED and will stop working automatically. Once you add water to the unit the indicator will turn off and will resume normal operation. ICE FULL INDICATOR (RED). When the ice-bin is full, the indicator will illuminate in RED. The indicator will remain lit until the ice in the bin either melts away slowly or has been removed. The unit will stay in a "Standby" mode until the ice has been removed / melted at which time the unit will automatically start operation as normal. 9