Avanti IM44U3S Instruction Manual - Page 10
Electrical Connection, Extension Cord, Surge Protector
View all Avanti IM44U3S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Electrical Connection WARNING Improper connection of the equipment-grounding can result in the risk of electrical shock. If the power cord of the range or icemaker is damaged, have it replaced by an authorized Avanti Products service center. This icemaker should be properly grounded for your safety. The power cord of this icemaker is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this icemaker must be properly grounded. This icemaker requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The cord should be secured behind the icemaker and not left exposed or dangling to prevent accidental injury. The icemaker should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the icemaker. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the icemaker by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the icemaker, be careful not to damage the power cord. Extension Cord Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this icemaker. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type icemaker extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes. Surge Protector Most electrical icemakers use a series of electric control boards to operate. These boards are very susceptible to power surges and could be damaged or destroyed. If the icemaker is going to be used in an area or if your city / country is prone to power surges / outages; it is suggested that you use a power surge protector for all electrical devices / icemakers you use. The surge protector that you select must have a surge block high enough to protect the icemaker it is connected to. If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area. Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty. 10