Avanti IM44U3S Instruction Manual - Page 20
The hardness level of the water
View all Avanti IM44U3S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
The ice maker stops suddenly while making ice. The body of the ice maker is electrified Scaling occurs frequently inside the machine. Water leaks from the ice storage bin The electricity is off. The room temperature is out of the stated range. The ice storage bin is full of ice. The ground line isn't in the socket. The hardness level of the water is too high. The drainhole below the ice storage bin is blocked. The drain hose is kinked or improperly placed higher than the floor of the ice storage bin. Reconnect the power supply line. Cut off the electricity and leave the ice maker disconnected until the temperature returns to within the stated range. Remove some ice cubes; make sure the ice-full probe is free of ice. Use a socket meeting the grounding requirements. Install a water-softening device in front of the water inlet. Remove the ice storage bin and clean the drainhole. Check the drain hose to be sure water can be drained out unhindered. 20