Avanti IMD250 Instruction Manual - Page 10
Ice Size Selection, Ice Size Indicator, Add Water Indicator, Ice Full Indicator Red - cube ice maker
View all Avanti IMD250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
OPERATING YOUR ICE MAKER Control Panel Description A ADD WATER or Tank Empty Indicator B ICE BIN FULL Indicator C Cube Size Selection Indicator (Large / Small) D Cube Size Selector Button E Power ON Indicator F Power ON / OFF Button Ice Size Selector (D) ICE SIZE SELECTION of (S) Small or (L) Large. The default cube size from the factory is set at SMALL. Each time you press this button the cube size selection will change 1 size (Small or Large) in sequence. The chosen mode shall stay as selected unless changed or there is a power failure. For the most efficient operation when ambient temperature is below 15°C (59ºF) use the small cube size setting. LED INDICATORS ICE SIZE INDICATOR (C) Cube size selection is shown (S) Small or (L) Large. The indicator next to the selected cube size will be illuminated green. ADD WATER INDICATOR (A). The ice maker automatically checks the water level in the tank. If the water level is too low the indicator will illuminate in RED and will stop working automatically. Once you add water to the unit the indicator will turn off and will resume normal operation. ICE FULL INDICATOR (RED) (B). When the ice-bin is full, the indicator will illuminate in RED. The indicator will remain lit even if the ice in the bin either melts away slowly or has been removed. The unit will stay in a "STANDBY" mode for approximately 6 hours. To restart the ice-making process push the "STOP" button, remove all of the ice from the ice-bin, wait for approximately 3 minutes and then press the "START" button. The ice-making process will return to normal mode. 10