Avanti Model Instruction Manual - Page 10
Operating Your Beverage Cooler
View all Avanti Model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
OPERATING YOUR BEVERAGE COOLER IMPORTANT SAFEGUARDS Do not store food in Beverage Center, as interior temperature may not get cool enough to prevent spoilage. As a natural result of condensation, in summer months or areas of high humidity, the glass door may build up moisture on the outside. Just wipe it away. It is recommended you install the appliance in a place where the ambient temperature is between 7278 ºF (22º - 26ºC). If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be reached. Your Beverage Cooler is designed to operate with at a range of 34º - 43º F (1 - 6ºC). You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display window. ON/OFF POWER To turn ON or OFF the appliance, press the button/mark . SETTING THE TEMPERATURE CONTROL You can press UP and DOWN buttons/marks to control the internal temperature . The degrees indicators will appear in the display window. • The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN button/mark once. NOTE: • If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Beverage Cooler will not start. • When you use the Beverage Cooler for the first time or restart the Beverage Cooler after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the Beverage Cooler is running for a few hours everything will be back to normal. • Also, as cold air falls and warm air rises, there could be a slight temperature variance between the top and bottom shelves. 10