Avanti WCR506SS Instruction Manual - Page 10

Operating Your Wine Chiller

Page 10 highlights

OPERATING YOUR WINE CHILLER It is recommended you install the appliance in a place where the ambient temperature is between 7278 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 40-65 degrees Fahrenheit may not be reached. Your wine chiller is designed to operate with at a range of 40º - 65º F (5 - 18ºC). Recommended Temperatures for Chilling Wine. Red Wines Dry / White Wines 58 - 65 ºF 48 - 57 ºF 14 - 18 ºC 10 - 13 ºC Rose Wines Sparkling Wines 49 - 51 ºF 40 - 47 ºF 9 - 11 ºC 5 - 8 ºC Wine Chiller Control Panel 1 Interior Light ON/OFF Button 2 Temperature UP Button 3 Electronic Display 4 ºF/ºC Indicator Light 5 Temperature DOWN Button 6 ºF/ºC Selector Button 7 Power Button You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC button/mark. Fahrenheit or Celsius degrees indicator will appear in green color in the temperature display window.  ON/OFF POWER To turn ON or OFF the appliance, press the button/mark and hold for 3 seconds.  SETTING THE TEMPERATURE CONTROL You can press and buttons/marks to control the internal temperature . The degrees indicators will appear in the display window. • The temperature that you desire to set will increase 1ºF or 1ºC if you push the button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the button/mark once. NOTE: • If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Wine Chiller will not start. • When you use the wine chiller for the first time or restart the wine chiller after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the wine chiller is running for a few hours everything will be back to normal.  STORAGE Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary. NOTE: Capacity: Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles and include bulk storage. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

10
OPERATING YOUR WINE CHILLER
It is recommended you install the appliance in a place where the ambient temperature is between 72-
78 degrees Fahrenheit.
If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected.
For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate.
The range of 40-65 degrees Fahrenheit may
not be reached.
Your wine chiller is designed to operate with at a range of 40º - 65º F (5 – 18ºC).
Recommended Temperatures for Chilling Wine
.
Red Wines
58 - 65 ºF
14 - 18 ºC
Rose Wines
49 - 51 ºF
9 - 11 ºC
Dry / White Wines
48 - 57 ºF
10 - 13 ºC
Sparkling Wines
40 - 47 ºF
5 - 8 ºC
Wine Chiller
Control Panel
1
Interior Light ON/OFF Button
5
Temperature DOWN Button
2
Temperature UP Button
6
ºF/ºC Selector Button
3
Electronic Display
7
Power Button
4
ºF/ºC Indicator Light
ON/OFF POWER
To turn ON or OFF the appliance, press the
button/mark and hold for
3
seconds.
SETTING THE TEMPERATURE CONTROL
You can press
and
buttons/marks to control the internal temperature .
The degrees indicators will appear in the display window.
The temperature that you desire to set will increase 1ºF or 1ºC if you push the
button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
button/mark once.
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
When you use the wine chiller for the first time or restart the wine chiller after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout.
This is normal and it is due to the length of the activation
time. Once the wine chiller is running for a few hours everything will be back to normal.
STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able
to store may vary.
NOTE:
Capacity:
Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles and
include bulk storage.
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the
ºF/ºC
button/mark.
Fahrenheit or Celsius degrees indicator will appear in green color in the temperature
display window.