Axis Communications 212 PTZ 212 PTZ/-V - Installation Guide - Page 12
Other methods of setting the IP address, Set the IP address with ARP/Ping - axis default ip address
View all Axis Communications 212 PTZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Page 12 AXIS 212 PTZ/-V Installation Guide Other methods of setting the IP address The table below shows the other methods available for setting or discovering the IP address. All methods are enabled by default, and all can be disabled. UPnP™ Bonjour Use in operating system Windows (ME or XP) MAC OSX (10.4 or later) AXIS Dynamic DNS All Service ARP/Ping All View DHCP server All admin pages Notes When enabled on your computer, the camera is automatically detected and added to "My Network Places." Applicable to browsers with support for Bonjour. Navigate to the Bonjour bookmark in your browser (e.g. Safari) and click on the link to access the camera's web pages. A free service from Axis that allows you to quickly and simply install your camera. Requires an Internet connection with no HTTP proxy. See www.axiscam.net for more information. See below. The command must be issued within 2 minutes of connecting power to the camera. To view the admin pages for the network DHCP server, see the server's own documentation. Set the IP address with ARP/Ping 1. Acquire an IP address on the same network segment your computer is connected to. 2. Locate the serial number (S/N) on the AXIS 212 PTZ/-V label. 3. Open a command prompt on your computer and enter the following commands: Windows syntax: Windows example: arp -s ping -l 408 -t arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 UNIX/Linux/Mac syntax: UNIX/Linux/Mac example: arp -s temp arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 ping -s 408 192.168.0.125 4. Check that the network cable is connected to the camera and then start/restart the camera, by disconnecting/reconnecting power. 5. Close the command prompt when you see 'Reply from 192.168.0.125: ...' or similar. 6. In your browser, type in http:// in the Location/Address field and press Enter on your keyboard. Notes: • To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK. • To use the ARP command on a Mac OS X, use the Terminal utility in Application > Utilities.