Axis Communications 212 PTZ 212 PTZ/-V - Installation Guide - Page 3
Installation steps, Package contents - camera
![]() |
View all Axis Communications 212 PTZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
AXIS 212 PTZ/-V Installation Guide Page 3 Installation steps This guide provides instructions for installing the AXIS 212 PTZ/-V Network Camera on your network. For all other aspects of using the product, please see the AXIS 212 PTZ/-V User's Manual, available from www.axis.com or on the Axis Network Video Product CD. 1. Check the package contents against the list below. 2. Install the hardware on page 5. 3. Set the IP address on page 7. 4. Set the password on page 10. 5. Complete the installation on page 11. Important! This product must be installed in compliance with local laws and regulations. Package contents ENGLISH Item Title/Variants Network Camera AXIS 212 PTZ AXIS 212 PTZ-V Indoor power adapter Note: The power adapter is country specific, please check that the type of power adapter you are using is correct Europe UK Australia USA/Japan Argentina Korea Extension cable 1.8 m (5.9 ft.) Power cable Terminal block connector 4-pin I/O connector block Mounting kit Screwdriver for tamper-proof screws Tamper-proof screws (16 mm) Drill template Angled wall mount - inc. screws (12 mm) Screws (38 mm) and plugs for wall mount Printed material AXIS 212 PTZ/-V Installation Guide Axis Network Video Product CD Warranty document
![](/manual_guide/products/axis-communications-212-ptz-212-ptzv-installation-guide-58faaf1/3.png)