Axis Communications 215 PTZ 215 PTZ - Installation Guide - Page 9
Replacing the dome glass, AXIS 215 PTZ Installation Guide, - axis power supply
View all Axis Communications 215 PTZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
AXIS 215 PTZ Installation Guide Page 9 12. Gently tighten the screws so that the ceiling tile is held between the inner and outer brackets. Check that none of the cabling is trapped by the brackets. Note: When power is applied, check that the indicator LEDs indicate the correct condi- tions. See the table on page 16 for further details. 13. Using the supplied screwdriver, attach the smaller dome cover, using the 2 M4x10 resitorx screws. ENGLISH ENGLISH M4x10 resitorx screw Replacing the dome glass The dome cover can be fitted with the clear or the smoked plastic glass. To switch covers, use a torque T6 screwdriver to remove the 4 fastening screws on the inside of the dome, as shown here. You are advised to take care when handling the plastic glass, to avoid scratching it. The wearing of cotton gloves is recommended.