Axis Communications M7016 M7016 Video Encoder - Installation Guide - Page 11
Install the Hardware
View all Axis Communications M7016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH AXIS M7016 Video Encoder RS-485/422 Connector Two 2-pin terminal blocks for RS485/RS422 serial interface. The serial port can be configured to support: • Two-wire RS485 half duplex • Four-wire RS485 full duplex • Two-wire RS422 simplex • Four-wire RS422 full duplex point to point communication RS485/422 RX/TX TX 1 2 34 Function Pin RS485/RS422 RX/TX 1 A RS485/RS422 RX/TX 2 B RS485/RS422 TX A 3 RS485/RS422 TX B 4 Notes (RX) For full duplex RS485/RS422 (RX/TX) For half duplex RS485 (TX) For full duplex RS485/RS422 SD Card Slot Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with speed class 10. Install the Hardware Mount the video encoder The AXIS M7016 is supplied with a mounting kit containing brackets. The unit can be mounted in a rack or on a wall. After removing the existing 4 screws, attach the mounting brackets to the video encoder at an angle suitable for installation in a standard 1U 19" rack, or on the wall. Mounting on a wall 1. Position the video encoder against the wall with the brackets attached, and mark the four mounting holes, two for each bracket. 2. Drill the four mounting holes. 3. Attach the video encoder to the wall using appropriate screws. 11