Axis Communications P3367-VE P3346-VE/P3367-VE/P3384-VE - Installation Guide - Page 12
Connectors
View all Axis Communications P3367-VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Page 12 Connectors Network Connector AXIS P33-VE Series Installation Guide AXIS P3367-VE and AXIS AXIS P3384-VE: Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's instructions. For information about regulatory requirements, see Regulatory Information, on page 2. AXIS P3346-VE: The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's instructions. For information about regulatory requirements, see Regulatory Information, on page 2. • RJ-45 Ethernet connector. Supports Power over Ethernet. Audio Connectors • Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal). • Audio out - Audio output (line level) that can be connected to a public address (PA) system or an active speaker with a built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for the audio out. SD Card Slot • SDHC memory card slot - The high capacity SD memory card can be used for local recording with removable storage.