Axis Communications P3367-VE P3346-VE/P3367-VE/P3384-VE - Installation Guide - Page 24
Reset to Factory Default Settings, Further information - axis network camera
View all Axis Communications P3367-VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Page 24 AXIS P33-VE Series Installation Guide Reset to Factory Default Settings Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values. The installation and management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup To reset all parameters and the IP address to Factory Default settings: 1. Disconnect the power from the product. 2. Press and hold the Control button and reconnect power. 3. Keep the Control button pressed for about 15-30 seconds until the Status LED indicator flashes amber. 4. Release the Control button. 5. When the Status indicator displays green (which can take up to 1 minute) the process is complete and the product has been reset to factory default settings. Using the installation and management software tools, assign an IP address, set the password, and access the video stream. Further information The user's manual is available from the Axis web site at www.axis.com or from the Axis Network Video Product CD supplied with this product. Visit www.axis.com/techsup to check if there is updated firmware available for the AXIS P33-VE Series. To see the currently installed firmware version, see Setup > About in the camera's web pages.