Behringer 2600 Quick Start Guide - Page 10

18 2600 Specifications Outputs VCO 1 / 2 / 3 Outputs (saw) Outputs (pulse) Outputs (tri) Outputs (sine) VCF Outputs ADSR / AR Envelope Generator Output VCA Output Mixer / reverb Post-attenuator outputs Post-mixer output L / R outputs LFO LFO (triangle) LFO (square) LFO delayed (sine) Envelope follower Output (preamp x1000 ) Output (preamp x100 ) Output (preamp x10 ) Output (env follower) Ring modulator Output Noise generator Output Voltage processor Inverter 1 output Inverter 2 output Lag output Sample & hold Internal clock out S/H out Portamento / keyboard Trig out Upper voice Gate out Keyboard CV output Phones Type Max. output level Output impedance Dual Inputs / Outputs Voltage Processor Mult inputs / outputs Sample & Hold Elec switch A / B / C MIDI in / thru USB (MIDI) 3 x 3.5 mm TS jacks, 1 kΩ unbalanced 3 x 3.5 mm TS jacks, 800 Ω unbalanced 2 x 3.5 mm TS jacks, 1 kΩ unbalanced (VCO 2 / 3 only) 2 x 3.5 mm TS jacks, 1 kΩ unbalanced (VCO 2 / 3 only) 1 x 3.5 mm TS jack, 1 kΩ unbalanced 2 x 3.5 mm TS jacks, CV range: 0 V to +10 V 1 x 3.5 mm TS jack, 1 kΩ unbalanced 2 x 3.5 mm TS jacks, 1 kΩ unbalanced 1 x 3.5 mm TS jack, 1 kΩ unbalanced 2 x 1/4" TS, 500 Ω unbalanced 2 x 3.5 mm TS jacks, 500 Ω unbalanced 1 x 3.5 mm TS jack, 1 kΩ unbalanced 1 x 3.5 mm TS jack, 1.8 kΩ unbalanced 1 x 3.5 mm TS jack, 1 kΩ unbalanced 1 x 3.5 mm TS jack, max. output gain: +60 dBu 1 x 3.5 mm TS jack, max. output gain: +40 dBu 1 x 3.5 mm TS jack, max. output gain: +20 dBu 1 x 3.5 mm TS jack, max. output level: +14 V 1 x 3.5 mm TS jack, output level: -10 V to +10 V 1 x 3.5 mm TS jack, output level: -10 V to +10 V 1 x 3.5 mm TS jack, output level: -10 V to +10 V 1 x 3.5 mm TS jack, output level: -10 V to +10 V 1 x 3.5 mm TS jack, output level: -10 V to +10 V 1 x 3.5 mm TS jack, max. output level: +10 V 1 x 3.5 mm TS jack, max. output level: +14 V 1 x 3.5 mm TS jack, output level: +14 V 1 x 3.5 mm TS jack, max. output level: +10 V 1 x 3.5 mm TS jack, output level: +10 V 1 x 3.5 mm TS jack, max. output level: +7 V 1 x 1/8" TRS jack, stereo 5 dBu 8 Ω 4 x 3.5 mm TS jacks, all direct connection. 3 x 3.5 mm TS jacks, A / C on or B / C on 2 x 5-pin DIN, 16 channels Type B Controls VCO 1 / 2 / 3 Sliders Switches VCF / Resonator Sliders Switches AR / ADSR envelope generator Sliders Switches VCA Sliders Mixer / reverb Sliders LFO Sliders Envelope follower Sliders Switches Ring modulator Sliders Noise generator Sliders Quick Start Guide 19 Initial oscillator frequency: 10 (0.03) Hz / 100 (0.3) Hz / 1 (3.0 Hz) kHz / 10 (30 Hz) kHz, selectable Fine tune Pulse width: 10% to 90% Audio / LF (Kybd on / off) Sync on / off (VCO 2 / 3 only) S / H slider (VCO 1 / 2 only) ADSR LFO (VCO 1 only) VCO 1 (pulse, VCO 2 only) VCO 2 (sine, VCO 3 only) Noise generator (VCO 2 / 3 only) Audio / LF (kybd on / off) Sync on / off (VCO 1 / 2 only) Initial filter frequency Fine tune Resonance Ring modulator VCO 1 (pulse) VCO 2 (pulse) VCO 3 (saw) Noise generator Keyboard CV ADSR VCO 2 (sine) Mode: 4012 / 4072, selectable "Attack time Decay time Sus level Release time Time factor Manual" Time factor: x0.5 / x1 / x2, selectable Initial gain VCF Ring modulator AR ADSR VCF VCA Reverb L / R Pan LFO speed Vib delay Vib depth Input gain Preamp gain Gain range: x10 (20 dB) / x100 (40 dB) / x1000 (60 dB) , selectable VCO 1 (saw) VCO 2 (sine) Color: low freq / pink / white, adjustable Level