Behringer DCX2496LE Manual - Page 12

22 ULTRADRIVE PRO DCX2496/ULTRADRIVE DCX2496LE User Manual 6.5 Stereo operation plus 2 subwoofers In A In B Out 1 2 3 4 (5 and 6 not used) Left Stereo output Right XENYX X2222USB Mixing console EUROLIVE B1220 PRO EUROPOWER EP2000 Stereo power amplifier Left passive loudspeaker High (2) Right passive loudspeaker High (4) EUROLIVE B1800X PRO Low (3) Low (1) Left active subwoofer Right passive subwoofer 23 ULTRADRIVE PRO DCX2496/ULTRADRIVE DCX2496LE User Manual 6.6 Stereo bi-amp operation plus subwoofer and additional monitor Monitor output Right Left Stereo sub master In A In B In C XENYX X2222USB Mixing console High (2) High (4) Left Right Outputs: 1 2 3 4 5 6 Mid (1) Mid (3) Low (5) SUM (A + B) signal In C signal Active mono subwoofer EUROLIVE F1220A Full Range mono monitor Output 5 + 6 usable as additional mono delay line outputs. Fig. 6.5: Stereo operation plus 2 woofer cabinets Only two frequency ranges (Low and High) are used on each stereo side. The two passive speaker cabinets for the higher frequencies are limited towards the bass end and are fine-tuned in their sound with the DCX's internal equalizer. The stereo bass signal is first sent to the active woofer, which also provides the passive woofer cabinet with sufficient power for the right-hand low-frequency channel. The unused outputs 5 and 6 can be used as mono delay lines. Fig. 6.6: Stereo 2-way operation plus subwoofer and additional monitor Inputs A+B carry the stereo signal optimized for the two 2-way speakers. The woofer signal is derived from the sum signal of A+B, limited in its frequency range and routed to the active sub-woofer. A separate signal from the mixing console (aux/subgroup) for a separate speaker can be processed via In C. In our example, this is a full-range stage monitor with its own amplifier able to play back a dedicated monitor mix for the singer, drummer or other performers. This scenario does not apply to the DCX2496LE.