Behringer EUROPOWER PMH5000 Manual - Page 9
Loudspeaker connections - power mixer
View all Behringer EUROPOWER PMH5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
EUROPOWER PMH1000/PMH3000/PMH5000 4.3 Loudspeaker connections Your power mixer is equipped with high-quality loudspeaker connectors (compatible to NEUTRIK® SPEAKON®), which ensure safe and trouble-free operation. The SPEAKON® connector was especially developed for high-power loudspeakers. Once it is plugged in, it safely locks into position and cannot be accidentally disengaged. It prevents the occurrence of electrical shock and ensures the correct polarity. Each of the loudspeaker jacks carries only the assigned single signal (see the information given on the rear panel of the power mixer). Fig. 4.1: 1/4" TS connector Fig. 4.2: 1/4" TRS connector Fig. 4.3: XLR connectors Fig. 4.5: Professional speaker connector with polarity allocation Please be sure to only use commercial SPEAKON® cables (type NL4FC) for connecting your loudspeakers to the power mixer. Please check the pin assignment of your loudspeakers and cables dependent on the PMH speaker output you choose. EUROPOWER PMH1000/PMH3000/PMH5000 OUTPUT A 1+ 1- 2+ 2- MAIN L x x MONITOR x x MONO x x OUTPUT B x x OUTPUT B 1+ 1- 2+ 2- MAIN R x x MONO x x MONO x x BRIDGE x x Tab. 4.1: Polarity configuration of speaker connectors Fig. 4.4: 1/4" mono plug for footswitch 4. INSTALLATION 9