Behringer HA8000 V2 Quick Start Guide - Page 6
POWERPLAY HA8000/HA6000 Controls
View all Behringer HA8000 V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
10 POWERPLAY HA8000/HA6000 POWERPLAY HA8000/HA6000 Controls HA8000 (1) (7) (5) (13) (2) (4) (8) (6) (16) (17) (14) HA6000 (1) (2) (5) (9) (11) (12) (13) (3) (4) (10) (6) (18) (19) (15) (14) 11 Quick Start Guide (EN) Step 2: Controls (1) The MAIN METER displays the input level of (12) The TREBLE knob adjusts the channel's high the MAIN INPUT connector(s) and the DIRECT frequencies (HA6000 only). IN connector on the HA6000. When the HA8000 is powered on, the green ON LED (13) The POWER button turns the unit on and off. will light up. (14) The MAIN INPUT connectors allow source (2) The MASTER LEVEL knob(s) adjust the level of the MAIN INPUT signal. The HA8000 has individual knobs called MAIN IN 1 and 2 which control the 2 pairs of MAIN IN jacks. audio to be sent to all channels. The HA6000 accepts a single stereo signal via ¼" or XLR jacks. The HA8000 has a pair of ¼" stereo inputs, and each set has its own volume control. Note that the MAIN signal is (3) The DIRECT IN jack (HA6000 only) allows muted for channels with a cable connected stereo signals to be connected via to the DIRECT IN jack. ¼" TRS cable. (15) The MAIN OUT connectors (HA6000 only) (4) The PHONES OUT jacks allow headphones send the signal from the MAIN INPUT jacks to be connected to each channel for directly out via ¼" or XLR. individual monitoring. (16) An extra PHONES OUT jack is available on the (5) The CHANNEL METER displays the output rear panel of the HA8000. level of each individual channel. (17) The DIRECT INPUT jacks on the HA8000 (6) The OUTPUT LEVEL knob adjusts the accept signals via ¼" cables. When a channel's volume. connection is made to this jack, the MAIN (7) The IN 1/IN 2 button (HA8000 only) selects INPUTS are muted in the respective channel. whether the MAIN IN 1 or 2 signal is sent to (18) The AUX IN jacks on the HA6000 accept that channel. signals via ¼" cables. The signal can be (8) Engage the HA8000's MONO button to convert the channel's signal to mono. mixed with the MAIN IN signal via the channel's BALANCE knob. If a ¼" TS cable is used to connect to the AUX IN jack, (9) The L/R MONO buttons allow the HA6000's it is recommended to press the channel's input signal to be heard in mono. MONO button so that the signal is heard (10) The HA6000's BALANCE knob adjusts the in both ears. ratio between the MAIN/DIRECT IN signals (19) The OUT jacks on the HA6000 echo the front and the AUX IN. If nothing is connected panel PHONES OUT jacks. to the channel's AUX IN jack, then the BALANCE knob controls the stereo balance of the MAIN signal. (11) The BASS knob adjusts the channel's low frequencies (HA6000 only).