Behringer MIX-SEQUENCER MODULE 1050 Quick Start Guide - Page 5

8 MIX-SEQUENCER MODULE 1050 MIX-SEQUENCER MODULE 1050 (EN) Controls (1) CHANNEL LEVEL KNOBS - Each knob controls the mix level for its respective mixer channel, and the knobs are color-coded into two groups of four channels each for further sub-mixing with the LEVEL A and LEVEL B knobs. (2) CHANNEL ON/OFF BUTTONS - These buttons select and indicate which mixer channels are on or off. Press a button to manually select and activate a channel. When a channel is active, the button will light and the gate for that channel will be open. During a sequence, when an individual channel is active during its step, the button for that channel will light for the duration of the sequence step. During a sequence, you can press an on/off button to manually turn on a channel, and that channel will stay on during the sequence until you press the channel's on/ off button again. (3) EXCLUSIVE-ON BUTTONS - To use this function, the COUNTER rotary switch should be set to OFF. Press one of these red buttons to Quick Start Guide 9 solo that button's respective channel and preview the signal. When a channel is soloed, the CHANNEL ON/OFF BUTTON for that channel will light, and the other channels will be muted. You may also press the CHANNEL ON/OFF BUTTONS on other channels to hear those channels along with the soloed channel. When the mixer is in 4-channel mixer mode, the EXCLUSIVE-ON BUTTONS 1-4 operate independently from channels 5-8. (4) LEVEL A - When in 4-channel mixer mode, use this knob to adjust the overall mix level for the channel 1-4 group. When 8-channel mixer mode is enabled, this knob is master to all 8 input channels (5) LEVEL B - When in 4-channel mixer mode, use this knob to adjust the overall mix level for the channel 5-8 group. When 8-channel mixer mode is enabled, this knob is master to all 8 input channels.