Behringer POWERPLAY PRO-8 HA8000 Manual - Page 7

POWERPLAY PRO-XL HA4700/PRO-8 HA8000 Fig. 4.4: 1/4" TRS connector for headphones operation + Please assure that the unit is installed and operated only by people with an understanding of the unit’s functions. During and after the installation always make sure that those handling the unit are themselves properly grounded. Failure to do so may cause undesirable or faulty operation through electrostatic discharge. 6V9DPÃDIQVUT MAIN IN Input impedance Max. input level CMRR AUX IN Input impedance Max. input level DIRECT IN Input impedance 6V9DPÃPVUQVUT MAIN OUT PHONES OUTPUT QPX@SÃ6HQGDAD@S Max. output power Min. output load impedance T`TU@HÃTQ@8DAD86UDPIT Frequency response Noise Dynamic range Distortion (THD) 5. SPECIFICATIONS QPX@SQG6`ÃQSPYGÃC6#& QPX@SQG6`ÃQSP'ÃC6' HF-filtered, servo-balanced XLR- and 1/4" TRS connectors HF-filtered, servo-balanced 1/4" TRS connectors 40 kΩ balanced, 30 kΩ unbalanced 40 kΩ balanced, 20 kΩ unbalanced 16 dBu balanced and unbalanced typically 40 dB, >55 dB @ 1 kHz 1/4" TRS connector (stereo) - 5 kΩ - +22 dBu - 1/4" TRS connector (stereo) 15 kΩ XLR- and 1/4" TRS connectors, balanced - 1/4" TRS connector (stereo) +24 dBm (load impedance 100 Ω) +21 dBm (load impedance 8 Ω) 8 Ω +24 dBm (load impedance 100 Ω) 100 Ω 10 Hz to 150 kHz, +/-3 dB 22 Hz to 22 kHz >90 dB @ 0 dBu 22 Hz to 22 kHz: 110 dB 0.006 % typ. @ +4 dBu, 1 kHz, Gain 1 (continued on next page) 5. SPECIFICATIONS 7