Behringer VIRTUALIZER PRO DSP2024P Manual - Page 27

Using the VIRTUALIZER PRO in the insert path - setup

Get Behringer VIRTUALIZER PRO DSP2024P PDF manuals and user guides View all Behringer VIRTUALIZER PRO DSP2024P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

VIRTUALIZER PRO DSP2024P + If your mixing console has aux busses that feature one jack for the aux send, use audio channel 1 on the DSP2024P. In this case, you must choose the mono mode (see chapter 3.6.2). + To avoid damage to your equipment, turn down the volume level on your amplifier when making connections. Switch off the devices that you want to connect to one another until plug connections have been completed as described. Let’s assume you want to operate the DSP2024P in a live situation in connection with a mixing console, and use a chorus to enhance the guitar sound. Connect the VIRTUALIZER PRO to the aux busses of your mixing console (fig. 4.1). Make the mains connection and set the operating level if necessary. Switch on the unit. In SETUP mode (output), select “EXTN” to ensure that the Mix External mode is activated. Press the EFFECT key and use the JOG WHEEL to select the stereo chorus effect (no. 16). Turn up the aux busses slowly till you have mixed the desired effect with the guitar signal. After this, you can start fine tuning. You will probably want to specify the chorus’ modulation. Turn the 1st EDIT CONTROL to determine the speed of the modulation. To adjust the modulation depth, turn the 2nd EDIT CONTROL. Proceed further following this principle. If you want the 1st EDIT CONTROL to change EDIT E, you must first press the EDIT key. After all the parameters have been changed as you wish, you can store the modifications in the original (or a different) preset. 4.3 Using the VIRTUALIZER PRO in the insert path Generally, you can use the DSP2024P on channel or subgroup inserts, using a standard insert cable. Connection to a channel insert makes sense when you want to process very specific signals (e.g. vocals) with the VIRTUALIZER PRO, or when all other options for connecting the DSP2024P are already used by other units. For compressors, expanders and gates, the channel insert is the best choice. Fig. 4.2: Wiring the VIRTUALIZER PRO in the insert path 4. APPLICATIONS 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
27
VIRTUALIZER PRO DSP2024P
+
If your mixing console has aux busses that feature one jack for the aux send, use audio
channel 1 on the DSP2024P± In this case, you must choose the mono mode (see chapter 3±6±2)±
+
To avoid damage to your equipment, turn down the volume level on your amplifier when
making connections± Switch off the devices that you want to connect to one another until plug
connections have been completed as described±
Let³s assume you want to operate the DSP2024P in a live situation in connection with a mixing console, and
use a chorus to enhance the guitar sound±
Connect the VIRTUALIZER PRO to the aux busses of your mixing console (fig± 4±1)± Make the mains
connection and set the operating level if necessary± Switch on the unit± In SETUP mode (output), select ´EXTNµ
to ensure that the Mix External mode is activated± Press the EFFECT key and use the JOG WHEEL to select
the stereo chorus effect (no± 16)± Turn up the aux busses slowly till you have mixed the desired effect with the
guitar signal± After this, you can start fine tuning± You will probably want to specify the chorus³ modulation±
Turn the 1st EDIT CONTROL to determine the speed of the modulation± To adjust the modulation depth, turn
the 2nd EDIT CONTROL± Proceed further following this principle± If you want the 1st EDIT CONTROL to change
EDIT E, you must first press the EDIT key± After all the parameters have been changed as you wish, you can
store the modifications in the original (or a different) preset±
4±3
Using the VIRTUALIZER PRO in the insert path
Generally, you can use the DSP2024P on channel or subgroup inserts, using a standard insert cable±
Connection to a channel insert makes sense when you want to process very specific signals (e±g± vocals) with
the VIRTUALIZER PRO, or when all other options for connecting the DSP2024P are already used by other
units± For compressors, expanders and gates, the channel insert is the best choice±
Fig± 4±2: Wiring the VIRTUALIZER PRO in the insert path
4± APPLICATIONS