Beko B3T4824D Owners Manual - Page 16

4 Installation Read the "Safety Instructions" first! Before consulting the nearest Authorized Service for installing the drying machine, see the information in the user guide and make sure the electric and water utilities are as required. If not, call an electrician and plumber to arrange the utilities as necessary. It is customer's responsibility to prepare the location the drying machine shall be placed on and also have power and waste water installation prepared. Check for any damage on the drying machine before installing it. If drying machine is damaged, do not get it installed. Damaged products cause a risk for your safety. Wait 12 hours prior to operating the drying machine. • Once the drying machine is installed, the connections must stay stable. After placing the drying machine, ensure that the back wall does not come in contact with any extrusion (a water tap, electrical outlet etc.). • Place the drying machine with at least 1 cm space between the product and the furniture edges. • Your drying machine is suitable to be operated between +5°C to +35°C. If operated outside this temperature range, your drying machine's operation may be compromised and get damaged. • The drying machine shall not be placed with the back side against a wall. B Do not place the drying machine on its power cord. * Ignore following warning if your product's system does not contains R290. NOTICE The product includes a cooling agent and if the product is operated right after its transported, it may get damaged. After each time the product is moved, it shall be left to rest for 12 hours. 4.1 Right place for installation • Install the drying machine on a flat and stable surface. • Dryer machine is heavy. Do not move it by yourself. • Operate the drying machine in an environment free of dust with good ventilation. • The gap between the drying machine and the floor shall not be reduced via materials such as rugs, pieces of wood and bands. • Do not block the ventilation grilles of the drying machine. • There shall not be doors that can be locked, sliding doors or hinged doors near the installation environment of the drying machine that may block the loading door to be opened. Dryer contains R290 refrigerant.* R290 is an environment-friendly, but flammable refrigerant.* Ensure that the air inlet of the dryer is open and it is well-ventilated.* Keep potential flame sources away from the dryer.* 4.2 Removing the shipping safety group Remove the shipping safety group prior to first use the product. Do not leave an accessory or any NOTICE parts of the shipping safety group inside the drum. 16 Dryer / User manual