Beko B3T4824D Owners Manual - Page 8

• Install the product where periodic maintenance and cleaning can be done with ease. • Place the product with its back surface to the wall (for heater models). • After placing the product, ensure that the back wall does not come in contact with any extrusion (a water tap, electrical outlet etc.). • Place the product with at least 1 cm space between the product and the furniture edges. • Follow the flue connection rules specified in the guide (for models with flue). • The exhaust air shall not be directed to flue which is used to exhaust the smoke of devices that consume gas or other fuels (for models with flue). • The ventilation hose shall not be connected to a heating stove or a chimney flue (for models with flue). • Plug the product to a grounded outlet protected with an appropriate fuse in align with the specified type and current rates. Have an expert electrician set grounding equipment. Do not use the product without a grounding conforming with regional/national regulations. • Plug the product in a grounded socket that conforms with the voltage, current and frequency values specified in the type label. • Do not plug the product to loose, broken, dirty, greasy sockets or sockets that has come out their seats or sockets with a risk of water contact. • The new hose sets supplied with the product shall be used. Do not reuse the old hose sets. Do not make attachments to the hoses. • Place the power cord and hoses not cause a risk of tripping over. • To use the product on top of a washing machine, a fixing aperture shall be used between two products. Fixing aperture shall be mounted by the authorised service. • When the product is placed on the washing machine, their combined weight when full could be around 180 kg. Place the products on a sturdy floor that can carry adequate amount of load. • Washing machine cannot be placed on top of the drying machine. 8 Dryer / User manual