Beko B3T49241D Owners Manual - Page 16

4.3 Water connection Instead of periodically draining the water accumulated in the water tank, you can discharge via the water discharge hose supplied with the drying machine. Connecting the water drainage hose 1-2 Remove the 1 2 hose behind the drying machine by pulling it manually from 3 4 where it is attached. Do not use a tool to remove the hose. 3 Insert one end of the water discharge hose supplied with the drying machine to where you have removed the hose on the drying machine. 4 Fix the other end of the water discharge hose to directly waste water drainage or a sink. 4.4 Adjusting the stands Until the drying machine stands level and sturdy, adjust the stands by turning them left and right. 4.5 Moving the drying machine • Drain the water in the drying machine completely. • If the product is connected via direct discharge, remove the hose connections. The drying machine is recommended to be moved in upright position. Otherwise, tilt it to the right side when viewed from the front and move the drying machine. Wait 12 hours prior to operating the drying machine. 4.6 Warning regarding the noise NOTICE The water discharge hose shall be fixed at maximum 80 cm height. Ensure that the water discharge hose do not get kinked, collapsed or pressed on between the discharge and the drying machine. Hose shall be connected not to be disconnected from its location. Leaked water may cause damage. Do not extend the water drainage hose. Check whether the water runs at an appropriate flow. The drainage line shall not be closed or clogged. If an accessory package is provided with your product, check the detailed instructions. As the product is operated, metallic noises may come from the compressor from time to time, it is normal. When the product is operated, the accumulated water is pumped to the water tank. It is normal to hear pumping sounds from the appliance during this operation. 4.7 Replacing the lighting bulb If your drying machine has drum lighting lamp; Consult the authorized service to replace the bulb/LED used in lighting your drying machine. The bulb in this product is not suitable for home lighting. The intended use of this lamp is to ensure safely loading the laundry to the drying machine. The lamps used in this appliance is resistant to heavy physical conditions such as temperatures over 50°C. 16 Dryer / User manual