Beko B3T49241D Owners Manual - Page 23
Water tank, Cleaning of filter drawer, heat exchanger, 7 Starting the program, 8 Child Lock, 9
View all Beko B3T49241D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Water tank If the water tank fills up while the program continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the program by pressing the Start / Stand-by button. Warning indicator turns off and program resumes. Cleaning of filter drawer/ heat exchanger Warning symbol flashes periodically to remind that filter drawer must be cleaned. 6.7 Starting the program Press the Start/Stand-by button to start the program. Start/Stand-by and Drying indicators turn on to show that program started. 6.8 Child Lock The drying machine has a child lock which prevents the program flow from being interrupted when the buttons are pressed during a program. When the Child Lock is activated, all buttons on the panel except the On/Off/Program Selection button are deactivated. Press the Audible Warning button for 3 seconds in order to activate the child lock. The child lock has to be deactivated to be able to start a new program after the current program is finished or to be able to interfere with the program. To deactivate the child lock, keep the same buttons pressed for 3 seconds. When the child lock is activated, the child lock warning indicator on the screen turns on. When the child lock is active: The drying machine runs, or in stand-by state the indicator symbols will not change upon changing the position of the program selection button. When the drying machine is operated and the child lock is active, if the program selection button is turned, a double beeping noise will be heard. If the child lock is deactivated before the program selection button is turned to its original place, the program will be terminated since the program selection button is displaced. 6.9 Changing the program after it is started You can change the program you selected to dry your laundry with a different program after the drying machine starts running. • For example, Pause the program and turn the On/Off/Program Selection button to select the Extra Dry program in order to select the Extra Dry program instead of Ironing Dryness. • Press the Start/Stand-by button to start the program. Adding and removing clothes during stand-by If you want to add or remove clothes to/from the drying machine after the drying program starts: • Press the Start/Stand-by button to put the drying machine in Stand-by state. The drying operation stops. • Open the loading door while in Standby state, and close the door after you remove or add laundry. • Press the Start/Stand-by button to start the program. Dryer / User manual 23