Beko BIE243 User Manual - Page 26
Replacing
View all Beko BIE243 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
When installing the inner glass panel (1), make sure that the printed side of the panel faces towards the inner. It is important to seat lower corner of inner glass panel into the lower plastic slot. Push the plastic part towards the frame until you hear a "click". Replacing the oven lamp DANGER: Before replacing the oven lamp, make sure hat the product is disconnected from mains and cooled down in order to avoid the risk of an electrical shock. Hot surfaces may cause burns! The oven lamp is a special electric light bulb hat can resist up to 300 °C. See Technical specifications, page 10 for details. Oven lamps can be obtained from Authorised Service Agents or technician with licence. Position of lamp might vary from the figure. The lamp used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to see foodstuffs. The lamps used in this appliance have to withstand extreme physical conditions such as emperatures above 50 °C. If your oven is equipped with a round lamp: 1. Disconnect the product from mains. 2. Turn the glass cover counter clockwise to remove it. s51,33311'',$ok, 3. Remove the oven lamp by turning it counter clockwise and replace it with the new one. 4. Install the glass cover. 26/EN