Beko BQM22301 User Manual - Page 26
Maintenance
View all Beko BQM22301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
6 Maintenance and care General information Service life of the product will extend and the possibility of problems will decrease if the product is cleaned at regular intervals. fi 7 I • DANGER: Disconnect the product from mains supply before starting maintenance and cleaning works. There is the risk of electric shock! Cleaning the oven To clean the side wall (This feature is optional. It may not exist on your product.) 1. Remove the front section of the side rack by pulling it in the opposite direction of the side wall. 2. Remove the side rack completely by pulling it towards you. gi DANGER: • I Allow the product to cool down before you clean it. Hot surfaces may cause burns! • Clean the product thoroughly after each use. In this way it will be possible to remove cooking residues more easily, thus avoiding these from burning the next time the appliance is used. • No special cleaning agents are required for cleaning the product. Use warm water with washing liquid, a soft cloth or sponge to clean the product and wipe it with a dry cloth. • Always ensure any excess liquid is thoroughly wiped off after cleaning and any spillage is immediately wiped dry. • Do not use cleaning agents that contain acid or chloride to clean the stainless or inox surfaces and the handle. Use a soft cloth with a liquid detergent (not abrasive) to wipe those parts clean, paying attention to sweep in one direction. he surface might get damaged by some detergents or cleaning materials. Do not use aggressive detergents, cleaning powders/creams or any sharp objects during cleaning. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Do not use steam cleaners to clean the ppliance as this may cause an electric shock. Cleaning the control panel Clean the control panel and knobs with a damp cloth and wipe them dry. Do not remove the control buttons/knobs to lean the control panel. Control panel may get damaged! Catalytic walls (This feature is optional. It may not exist on your product.) The inner side walls (A) and/or the rear wall (B) of your product may be coated with catalytic enamel. Catalytic walls have a light matte colour and a porous surface. Catalytic walls of the oven should not be cleaned. Porous surfaces of the catalytic walls are automatically cleaned by absorbing and converting the spilled oil (steam and carbon dioxide). Easy Steam Cleaning It ensures easy cleaning because the dirt (having waited not for too long) is softened with the steam that forms inside the oven and the water drops condensing on the inner surfaces of the oven. 1. Remove all accessories inside the oven. 2. Place a metal container to the bottom of the oven. Add 400 ml water into the container. 26/EN