Beko BSFF3682 Owners Manual - Page 11
Changing the illumination
View all Beko BSFF3682 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Important Installation Instructions 1. To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions. 2. Do not operate this appliance unless installed to furniture. 3. The appliance should be located on a smooth surface. The four front and back feet can be adjusted as required. To ensure that, your appliance is standing upright adjust the four front and back feet by turning clockwise or anti-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise. 4. Refer to «Cleaning and Care» section to prepare your appliance for use. To avoid any loss in performance, air channels should not be obstructed. Minimum distance between the wall and the appliance must be at least 10 mm. 5. The appliance must be protected against rain, moisture and other atmospheric influences. Important: Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of theappliance as you might injure your fingers and hands Important:This appliance is not designed for stacking with any other appliance.When positioning your appliance, take care not to damage your flooring, pipes,wall coverings etc. Changing the illumination lamp To change the Bulb/LED used for illumination of your refrigerator, call your AuthorisedService. The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place foodstuffs in the refrigerator/ freezer in a safe and comfortable way.The lamps used in this appliance have to withstand extreme physical conditions such as temperatures below -20 °C. (only chest and upright freezer) 10 EN