Beko BXIF35300 User Manual - Page 22
Disconnect
View all Beko BXIF35300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
If your oven is equipped with a round lamp: 1. Disconnect the product from mains. 2. Turn the glass cover counter clockwise to remove it. Inner glass panel (2) must be installed into the plastic slot close the innermost glass panel (1). When installing the innermost glass panel (1), make sure that the printed side of the panel faces towards the inner glass panel. It is important to seat lower corner of inner glass panel into the lower plastic slot. Push the plastic part towards the frame until you hear a "click". Replacing the oven lamp Ae DANGER: I Before replacing the oven lamp, make sure . that the product is disconnected from mains and cooled down in order to avoid the risk of an electrical shock. Hot surfaces may cause burns! The oven lamp is a special electric light bulb that can resist up to 300 °C. See Technical specifications, page 9 for details. Oven lamps can be obtained from Authorised Service Agents or technician with licence. Position of lamp might vary from the figure. aatiU.S4o. 3. Pull out the oven lamp from its socket and replace it with the new one. 4. Install the glass cover. 22/EN