Beko CF6713 User Manual - Page 13

Transportation, Instructions, Installation Instructions

Page 13 highlights

Transportation Instructions 1. The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation. 2. If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right hand side when standing in the frontof the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle. 3. Failure to comply with the above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded. 4. The appliance must be protected against rain, moisture and other atmospheric influences. 5. When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle. 6. Empty any water in the drain tray before moving. See section 'Defrosting' and 'Care & cleaning' for further information. 7. Make sure that the defrost water pipe at the back of the product is fixed to the plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor. Important : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands. Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance. Important : Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged." Do not allow children to play with the appliance or tamper with the controls. Beko declines to accept any liability should the instructions not be followed. Important : This appliance is not designed for stacking with any other appliance.When positioning your appliance, take care not to damage your flooring, pipes,wall coverings etc. Installation Instructions 1. The space in the room where the appliance is installed must not be smaller than 10 cubic metres. 2. This appliance has been designed to operate in ambient temperatures up to 32 degrees C (90 degrees F) and is equipped with 'Freezer Guard' which ensures that at the advised setting [4 - four on the control] the frozen food in the freezer will not defrost even if the ambient temperature falls as low as -15 °C. So you may then install 13 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

EN
13
Transportation
Instructions
1.
The appliance should be transported
only in a vertical upright position.
The packing as supplied must be
intact during transportation.
2.
If during the course of transport
the appliance has to be transported
horizontally, it must only be laid on
its right hand side when standing
in the frontof the appliance. After
bringing it to upright position,it must
not be operated for at least 4 hours
to allow the system to settle.
3.
Failure to comply with the above
instructions could result in damage
occuring to the appliance. The
manufacturer will not be held
responsible if these instructions are
disregarded.
4.
The appliance must be protected
against rain, moisture and other
atmospheric influences.
5.
When positioning your appliance
take care not to damage your
flooring, pipes, wall coverings etc. Do
not move the appliance by pulling by
the door or handle.
6.
Empty any water in the drain
tray before moving. See section
‘Defrosting’ and ‘Care & cleaning’ for
further information.
7.
Make sure that the defrost water
pipe at the back of the product is
fixed to the plastic evaporating pan
on the top of the compressor, to
avoid defrost water spillage on the
floor.
Important :
Care must be taken
while cleaning / carrying the
appliance to avoid touching the
bottom of the condenser metal wires
at the back of the appliance as you
might injure your fingers and hands.
Do not attempt to sit or stand on top
of your appliance as it is not designed
for such use. You could injure yourself
or damage the appliance.
Important :
Make sure that ma±ns
cable ±s not caught under the
appl±ance dur±ng and after carry±ng
/ mov±ng the appl±ance, to avo±d
the ma±ns cable becom±ng cut or
damaged.”
Do not allow ch±ldren to play w±th the
appl±ance or tamper w±th the controls.
Beko
decl±nes to accept any l±ab±l±ty
should
the
±nstruct±ons
not
be
followed.
Important :
Th±s appl±ance ±s not
des±gned for stack±ng w±th any other
appl±ance.When pos±t±on±ng your
appl±ance, take care not to damage
your floor±ng, p±pes,wall cover±ngs
etc.
Installation Instructions
1.
The space in the room where the
appliance is installed must not be
smaller than 10 cubic metres.
2.
This appliance has been designed
to operate in ambient temperatures
up to 32 degrees C (90 degrees
F) and is equipped with ‘Freezer
Guard’ which ensures that at the
advised setting [4 - four on the
control] the frozen food in the
freezer will not defrost even if the
ambient temperature falls as low
as -15 °C. So you may then install