Beko CXFD6113 User Manual - Page 16

4 Before operating Final Check Before you start using the fridge/ freezer check that: 1. The feet have been adjusted for perfect levelling. 2. The interior is dry and air can circulate freely at the rear of the cabinet. 3. Clean the interior as recommended under "MAINTENANCE & CARE." 4. Insert the plug into the wall socket and switch on the electricity supply. • When the door is open the fridge interior light will come on. 5. You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, whether the compressor is running or not which is quite normal. "Due to operation of fans inside the fridge and the frost free freezer compartments, overall noise level is slightly higher in comparison to non-frost free appliances. This is quite normal and is not a fault." 6. Set the thermostat half way between min and max. 7. Front edges of the cabinet may feel warm. This is normal.These areas are designed to be warm to avoid condensation. 8. "Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached. We recommend that you check the temperature with an accurate thermometer (see; Temperature Control and Adjustment)" 9.When the freezer reaches the desired temperature the freezer fan will stop. When the freezer fan is on, the noise will be louder when the freezer door is opened. 10. Control system determines operation of the fridge fan in accordance with the cooling requirements. Fridge fan is designed to ensure homogenous distribution and circulation of the cold air inside your refrigerator. When the fridge door is opened, fridge fan stops. 11. Avoid spillage of food particularly small items like rice, peas, beans through the fan guard as they may cause the cooling system to block and therefore operate less efficiently. 15 EN