Beko DCU8230 User Manual - Page 20

2. If there is lint accumulation in the water tank cover, clean it and press to close. 3. Pull out the condenser. 3. Place the water tank into its seat. For the condenser Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank. C Clean the condenser after every 30 drying cycles or once a month. To clean the condenser: 1. If a drying process has been carried out, open the door of the machine and wait until it cools down. 4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. 2. Unlock the 2 condenser locks after opening the kick plate. 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely. 6. Close the kick plate cover. 20 EN