Beko DFN04210 User Manual - Page 13
Connect the brown live wire to
View all Beko DFN04210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows: 1. Connect the green - yellow or green (earth) wire to the terminal in the plug marked 'E' or with the symbol or coloured green and yellow or green. 2. Connect the blue (neutral) wire to the terminal in the plug marked 'N' or coloured black. 3. Connect the brown (live) wire to the terminal in the plug marked 'L' or coloured red. Green and yellow or green •• Before using the product, fill the salt reservoir with 1 litre of water, add salt (see next page) and stir to dissolve. Run the Dishwasher without dishes on a short programme with a small amount of detergent. A There might be a small amount of water left in the product after factory quality control tests. This causes no harm to the product. N Blue or black L Brown or red With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician. Initial use Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation". Dishwasher / User's Manual 11/36 EN