Beko DFN05X10 User Manual - Page 22
Operat²ng the product
View all Beko DFN05X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
5 Operating the product 1 23 4 7 65 1. Programme Starting Point 2. Rinse Aid indicator 3. Salt indicator 4. On/Off Indicator Light & Progress Indicator Lights 5. Start / Stop key 6. Half Load key 7. On/Off/Programme Selection Key On/Off Machine will be switched on when you move the Programme Selection key to position "1". "ON" light will illuminate. Machine will be switched off when you move it to "OFF" position. All lights will turn off. Programme selection Key Used to switch on/off the machine and select the washing programmes. Half Load key Select Half Load when using any wash programme [Except Prewash] to save on water, electricity and time if the machine is only half full. You can place dishes anywhere in the machine; some upper and some lower basket. Start / Stop key It is used to start, pause or cancel the selected programme. When you press the Start / Stop key, the washing programme you have selected will start. A To press the Start / Stop key, wait for two seconds after you turn on the machine by pressing the On / Off key. 22 /35 EN Starting your machine 1. Open the tap. 2. Plug in to the socket. 3. Open the door of the dishwasher. 4. Place the dishes in accordance with the instructions in the user manual. 5. Make sure that the upper and lower impellers rotate freely. 6. Put sufficient amount of detergent in the detergent dispenser and close its lid. 7. Check if the Salt and Rinse Aid indicators light and add salt and / or rinse aid if needed and close the door of the machine. 9. Select the most suitable programme by using the table of "Programme Data and Average Consumption Values". 10. Select the desired programme with Programme Selection key. 11. Start the programme by pressing Start / Stop key. Dishwasher / User's Manual