Beko DFN05X10 User Manual - Page 24
Half Load funct²on, How to cancel the wash²ng, Programme, Salt ²nd²cator, R²nse A²d ²nd²cator
View all Beko DFN05X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Operating the product C Programme and auxiliary functions cannot be set/ changed after the programme has started. C Your machine performs water softening depending on the hardness level of the supply water. The total time can also change while the programme is running depending on the ambient temperature where your machine is installed, temperature of the supply water and amount of the dishes. A Pay attention not to open the door of the machine when it is running. If you need to open the door, safety system will stop your machine. There may be a rush of vapour when you open the door of your machine; be careful. Washing programme will resume running when you close the door. Half Load function It is used to operate the machine without loading it completely. 1. Load your dishes in the machine using top and bottom baskets 2. Turn the machine on. 3. After selecting the desired programme, press the Half Load key. Half Load indicator lights up. 4. Close your machine's door and press Start / Stop key. C With the Half Load function you can save both water and power while using the lower and upper baskets of the machine. C Half Load function may cause changes in the programme duration. How to cancel the washing Programme To cancel a programme while the machine is operating: Press start/stop key for 3 seconds. The machine will drain the water inside the machine for 45 seconds. The programme is cancelled when washing light goes off. Then, you can choose and start a new programme. C There might be residues of detergent or rinse aid left in the machine and / or on the pieces being washed depending on the step the programme you have cancelled was in. Salt indicator Please check the Salt Indicator on the panel to see whether there is adequate amount of softening salt in the dishwasher or not. You need to refill the salt reservoir with salt whenever salt warning indicator appears on the panel of your machine. Rinse Aid indicator Please check the Rinse Aid Indicator on the panel to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid reservoir with rinse aid whenever rinse aid warning indicator appears on the panel of your machine. 24 /35 EN Dishwasher / User's Manual