Beko DFS05X10 User Manual - Page 23

Operating the product 11. Start the programme by pressing Start / Stop key. C Programme and auxiliary functions cannot be set/ changed after the programme has started. C Your machine performs water softening depending on the hardness level of the supply water. The total time can also change while the programme is running depending on the ambient temperature where your machine is installed, temperature of the supply water and amount of the dishes. A Pay attention not to open the door of the machine when it is running. If you need to open the door, safety system will stop your machine. There may be a rush of vapour when you open the door of your machine; be careful. Washing programme will resume running when you close the door. Half Load function It is used to operate the machine without loading it completely. 1. Load your dishes in the machine using top and bottom baskets 2. Turn the machine on. 3. After selecting the desired programme, press the Half Load key. Half Load indicator lights up. 4. Close your machine's door and press Start / Stop key. C With the Half Load function you can save both water and power while using the lower and upper baskets of the machine. C Half Load function may cause changes in the programme duration. Time Delay Using the Delayed Start button, you may delay the starting time of your programme up to 9 hours. After delaying the start, press Start/Cancel button and close the door of your machine. Once the delay time is over, the selected programme will start automatically. Cancelling the delay function Keep the Start/pause/cancel button pressed for 3 seconds. The selected delay period will be cancelled. As soon as the cancelling starts, the water remaining in your machine will be drained for 30 seconds due to safety reasons. How to cancel the washing Programme To cancel a programme while the machine is operating: Press start/stop key for 3 seconds. The machine will drain the water inside the machine for 45 seconds. The programme is cancelled when washing light goes off. Then, you can choose and start a new programme. C There might be residues of detergent or rinse aid left in the machine and / or on the pieces being washed depending on the step the programme you have cancelled was in. Dishwasher / User's Manual 23/34 EN