Beko DIS15020 Owners Manual - Page 26

6-Operating the product Read "Safety Instructions" section first! Read "Quick Quide" before this section. key Select the programme by pressing the desired programme key. Press the Start / Pause / Cancel key for 3 seconds to cancel the running programme. Function Keys If you press any of the Function keys during programme selection or time delay selection, the indicator of the function will flash if the programme you have selected supports the selected function. To cancel the selected function, press the function key again. Preparing the machine 1. Open the door of the dishwasher. 2. Place the dishes in accordance with the instructions in the user manual. 3. Make sure that the upper and lower impellers rotate freely. 4. Put adequate amount of detergent into the detergent dispenser. 5. Check if the Salt and Rinse Aid indicators light and add salt and/or rinse aid if needed. Programme selection 1. Press the On/Off button to turn on your machine. 2. Refer to the table of "Programme data and average consumption values" to determine a washing programme suitable for your dishes. 3. Selected programme will start when you close the door of your machine. 26/EN Auxiliary functions Washing programmes of your dishwasher are designed to obtain the best cleaning effect, considering the type of the soiling, soiling degree and properties of the dishes to be washed. Auxiliary functions allow you save from time, water and power. Auxiliary functions may cause changes in the programme duration. Auxiliary functions are not suitable for all washing programs. Indicator of the auxiliary function that is not compatible with the programme will not be active. Half Load function (Depends on model) It is used to operate the machine without loading it completely. 1. Load your dishes in the machine as you like. 2. Turn the machine on with On/Off key. 3. Select the desired programme and press the Half Load key. While the function is enabled, the Half Load indicator will come on in the function selection indicator and on the display. 4. Close the door of the machine to start the programme. With the Half Load function you can save both water and power while using the lower and upper baskets of the machine. Fast+ Function (Depends on model) It shortens the time of the washing cycle selected and decreases water consumption by enabling washing under higher pressure. Extra Drying Function (Depends on model) It provides superior drying performance.