Beko DIS15020 Owners Manual - Page 28

SelfDry (Depends on the Model) Thanks to the "SelfDry" feature on your machine, the drying effectiveness of your machine is improved and power is saved. There are two options, namely "OFF" and "ON". You may use sub-menu settings to change "SelfDry" settings. When you activate this function, the door of your machine is opened automatically at the end of the washing cycle. Auto door opening feature opens the doors at the end of the washing cycle thanks to the "door opening shafts". This process takes about 2 minutes. Do not force to close the door if the power is interrupted while the shafts are moving out. Operation shall be completed and shafts shall be retracted when the power is restored. SelfDry function may cause changes to the cycle time. Changing SelfDry Settings 1. Press the Delay and Start/Pause/ Cancel key simultaneously for 3 seconds after turning on your machine. 2. Press the Delay key until 3 hours delay indicator is illuminated in the menu. Using the function keys, set the SelfDry function on or off. Function is off when the first cycle indicator is illuminated, and it is turned on when the second cycle indicator is illuminated. 3. Turn off your machine with the On/Off key to save the setting. Floor illumination Warning to show that machine is in washing phase (depends on the model) Your machine reflects a light to the floor during the washing process. This light turns off after the washing process is complete. Floor illumination is activated automatically when the washing programme starts and remains lit until the end of the programme. Floor illumination cannot be cancelled by the user. IonGuard function (depends on the model) IonGuard function is enabled at regular intervals and prevents the formation of bad odours due to putrefaction. If this function is selected, it will be activated while the product is turned off and the IonGuard indicator on the panel will flash. A ventilation noise can be heard, this is normal. Until the function selection is disabled, system is automatically activated intermittently. Programming the washing time Time Delay If an economical electricity tariff is applied in your region, you can use the time delay function to wash your dishes during appropriate hours. You can delay the start of the selected programme up to 9 hours. Hold the delayed start key pressed for 1 second more than the other keys. 1. Press the time delay key after selecting the washing programme and other auxiliary functions. 2. Once you press the Time Delay key "3 hours" Time Delay indicator will start flashing. 28/EN