Beko DTGC8000 Owners Manual - Page 22
Lint Filter / Loading Door
View all Beko DTGC8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6 Maintenance and cleaning Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals. Unplug the product from the B mains during any maintenance and cleaning works (control panel, body, etc.). 6.1 Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter. C A layer can build up on the filter pores that can cause clogging of the filter after using the machine for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before reinstalling it. C Such fiber and lint are generally formed during wearing and washing. A Always clean the lint filter and the inner surfaces of the loading door after each drying process. C You can clean the lint filter housing with a vacuum cleaner. C Clean the entire inner surface of the loading door and loading door gasket. To clean the lint filter: 1. Open the loading door. 2. Remove the lint filter by pulling it up and open the lint filter. 3. Clean lint, fiber, and cotton raveling by hand or with a soft piece of cloth. 4. Close the lint filter and place it back into its housing. 22 / EN Dryer / User Manual