Beko DTGC8000 Owners Manual - Page 26
Troubleshooting
View all Beko DTGC8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Troubleshooting Clothes have shrunk, hardened or spoiled. • A program not suitable with the laundry type might have been used. >>> Check the maintenance labels on the clothes and select a program suitable for the clothes. The lighting inside the drying machine does not turn on. (For models with a lamp) • Drying machine might not be turned on with the On/Off button or program might not be selected for machines without an On/Off button. >>> Make sure that the drying machine is turned on. • Lamp might be malfunctioning. >>> Contact Authorized Service to replace the lamp. Filter cleaning warning symbol/LED is on/flashing. • Fibre filter might not be cleaned. >>> Clean the filter. • The filter slot might be clogged with lints. >>> Clean the filter slot. • A layer of fluff might have accumulated clogging up the lint filter pores. >>> Wash the filter with warm water. • The condenser might be blocked. >>> Wash the condenser. Water drips from the loading door. • Fibres might have gathered on the inner sides of the loading door and the loading door gasket. >>> Clean the inner surfaces of the loading door and the loading door gasket surfaces. Loading door opens by itself. • Loading door might not be closed completely. >>> Push the loading door until the closing sound is heard. Water tank warning symbol / led is on/flashing. • Water tank may be full. >>> Empty the water tank. • Water discharge hose might have collapsed. >>> If the product is connected directly to the water drain check the water discharge hose. Steam symbol is flashing.(For the products with a steam function) • Steam tank may be empty => Fill the steam tank with distilled or condensed water. Steam programs do not start (For the products with a steam function) • Steam tank may be empty, steam tank warning icon may light up on the screen => Fill the steam tank until the steam icon goes off. Wrinkles are not removed with wrinkle removing program. (For the products with a steam function) • Excess amount of laundry may have been placed => Place specified amount of laundry. • Steam application time may be selected in low level => Choose a program with high amount of steam. • After completion of the program, the laundry may have stayed in the machine for a long time => Take the laundry out as soon as the program finishes, and hang it out. Laundry odour not lessened with the odour removal program.(For the products with an odour removal program) • Excess amount of laundry may have been placed => Place specified amount of laundry. • Steam application time may be selected in low level => Choose a program with high amount of steam. A If the problem persists after following the instructions in this section, contact your vendor or an Authorized Service. Never try to repair your product yourself. 26 / EN Dryer / User Manual