Beko DTGC8011 Owners Manual - Page 14

5.8 Child Lock The drying machine has a child lock which prevents the programme flow from being interrupted when the buttons are pressed during a programme. When the child lock is activated, all buttons on the panel except the On/Off/Programme selection knob are deactivated. Press the End Time and Buzzer buttons simultaneously for 3 buttons to activate the child lock. The child lock has to be deactivated to be able to start a new programme after the current programme is finished or to be able to interfere with the programme. To deactivate the child lock, keep the same buttons pressed for 3 seconds. C NOTE • When the child lock is activated, the child lock warning indicator on the screen turns on. • Child lock deactivates when the drying machine is turned off and on by the On/ Off/Cancel knob. When the child lock is active: When the drying machine runs, or in standby state, the indicator symbols won't change upon changing the position of the programme selection knob. C NOTE • When the drying machine runs and the child lock is active, it beeps twice when the programme selection knob is turned. If the child lock is deactivated without returning the programme selection knob to its previous position, programme will terminate due to the change in the programme selection knob position. 5.9 Changing the programme after it is started You can change the programme you selected to dry your laundry with a different programme after the drying machine starts running • For instance, select Extra Dry programme by turning the On/Off/Programme selection knob to select Extra Dry instead of Iron Dry. • Press the Start/Stand-by button to start the programme. Adding and removing clothes during stand-by If you want to add or remove clothes to/from the drying machine after the drying programme starts: • Press the Start/Stand-by button to put the drying machine in Stand-by state. The drying operation stops. • Open the loading door while in Standby state, and close the door after you remove or add laundry. • Press the Start/Stand-by button to start the programme. C NOTE • Adding laundry after the drying operation starts may cause the dried laundry inside the machine to mix with wet laundry and leave the laundry damp at the end of operation. • Adding or removing laundry during drying may be repeated as many times as you wish. But this operation continuously interrupts the drying operation, and thus increases programme duration and energy consumption. So, it is recommended to add laundry before the programme starts. • If a new programme is selected by turning the programme selection knob while the drying machine is in stand-by, the running programme terminates. WARNING! • Do not touch the inner surface of the drum while adding or removing clothes during a continuing programme. The drum surface is hot. 14 Dryer / User Manual