Beko HIMW75225 User Manual - Page 12
Disposal
View all Beko HIMW75225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
» The normal length of a straight flame in the reduced position should be 6-7 mm. 4. If the flame is higher than the desired position, turn the screw clockwise. If it is smaller turn anticlockwise. 5. For the last control, bring the burner both to high-flame and reduced positions and check whether the flame is on or off. Depending on the type of gas tap used in your appliance the adjustment screw position may vary. • accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities. Future Transportation • Keep the product's original carton and transport the product in it. Follow the instructions on the carton. If you do not have the original carton, pack the product in bubble wrap or thick cardboard and tape it securely. • Secure the caps and pan supports with adhesive tape. Check the general appearance of your product for any damages that might have occurred during transportation. Disposing of the old product Flow rate adjustment screw 00 OO „./ 1 Flow rate adjustment screw f the gas type of the unit is changed, then he rating plate that shows the gas type of he unit must also be changed. Disposal Package information Packaging materials of the product are manufactured from recyclable materials in MOM Dispose of the old product in an environmentally friendly manner. This equipment bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this equipment must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact local or regional authorities. Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product. Before disposing of the product, cut off the power cable plug and make the door lock (if any) unusable to avoid dangerous conditions to children. 12/EN