Beko HIZG64120 User Manual - Page 12

conversion

Get Beko HIZG64120 PDF manuals and user guides View all Beko HIZG64120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Bottom view (clamp holes) Gas conversion DANGER Risk of explosion! Before starting any work on the gas installation, please shut off the gas supply. In order to change your appliance's gas type, change all injectors and make flame adjustment for all valves at reduced flow rate position. Secure the hob. • Call the authorised service for the gas conversion of your appliance. Important Clamping to different holes is not a good practice in terms of safety since it can damage the gas and electrical system. Exchange injector for the burners 1. Take off burner cap and burner body. 2. Unscrew injectors. 3. Fit new injectors. Final check 1. Open gas supply. 4. Check all connections for secure fitting and tightness. 2. Check gas installations for secure fitting and tightness. 3. Ignite burners and check appearance of the flame. Important The flames should be blue and burn smoothly. If the flames appear yellowish, check secure position of the burner cap or clean the burner. 12 I EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Bottom
view
(clamp
holes)
Secure
the
hob.
Important
Clamping
to
different
holes
is
not
a
good
practice
in
terms
of
safety
since
it
can
damage
the
gas
and
electrical
system.
Final
check
1.
Open
gas
supply.
2.
Check
gas
installations
for
secure
fitting
and
tightness.
3.
Ignite
burners
and
check
appearance
of
the
flame.
Important
The
flames
should
be
blue
and
burn
smoothly.
If
the
flames
appear
yellowish,
check
secure
position
of
the
burner
cap
or
clean
the
burner.
Gas
conversion
DANGER
Risk
of
explosion!
Before
starting
any
work
on
the
gas
installation,
please
shut
off
the
gas
supply.
In
order
to
change
your
appliance's
gas
type,
change
all
injectors
and
make
flame
adjustment
for
all
valves
at
reduced
flow
rate
position.
•
Call
the
authorised
service
for
the
gas
conversion
of
your
appliance.
Exchange
injector
for
the
burners
1.
Take
off
burner
cap
and
burner
body.
2.
Unscrew
injectors.
3.
Fit
new
injectors.
4.
Check
all
connections
for
secure
fitting
and
tightness.
12
I
EN