Beko HNT61210 Owners Manual - Page 11

4 Cleaning and maintenance Prior to cleaning and maintenance, unplug the 4.2 Changing of Carbon Filter appliance or turn the main swich off or loosen the fuse that supplies the hood. (Air Circulation Mode) Failure to comply with the provisions relating to cleaning of the device and replacement of filters may A cause fire risks. It is therefore recommended to comply with the guidelines given herein. The manufacturer is not liable for any damage to the engine or fires caused by improper use. Clean using only a cloth dampened with neutral liquid detergent. Do not clean with tools or instruments. Do not use abrasive products. Do not use alcohol The hood can be fitted with an active carbon filter. The carbon filter is applied only in case the hood is not connected to the vent duct. In any case it is necessary to replace the carbon filter at least every three months. When replacing the carbon filter pay attention to the type of used turbine. 1 2 1 Symbol Symbol 2 Filter installation Filter dismanting 4.1 Cleaning of Aluminium Grease Filter This filter captures oil particles in the air. You are recommended to clean your filter every month under normal usage conditions. First remove the grease filters for this process. Wash the filters with liquid detergent and rinse them with water and install them back after they get dry. Aluminium grease filters may get discolered as they are washed; this is normal and you don't need to change your filter. A WARNING: The carbon filter is never washed. A WARNING: Carbon filter is available from Authorized Services. C You can wash the Aluminium filter in the dishwasher Hood / User Manual 11 / EN