Beko HQI64400AT User Manual - Page 19

O Right rear and left rear cooking zone displays serve as timer display when the mer is active. "e" 5. Touch "0" or keys to set the desired time. 0 The timer can only be set for the cooking zones already in use. ° Repeat the above procedures for the other cooking zones for which you wish to set the mer. Timer cannot be adjusted unless the cooking zone and the temperature value for the cooking zone are selected. 0 When the cooking zone for which a timer was set is selected, you can see the remaining me by touching the " key again. Deactivating the timer Once the set time is over, the hob will automatically turn off and give an audible warning. Press any key to silence the audio warning. Turning off the timers earlier If you turn off the timer earlier, the hob will carry on operating at the set temperature until it is turned off. 1. Select the cooking zone you want to turn off. 2. Touch "0" key to turn the timer on. 3. Until "00" appears on the timer screen, touch "0" to set the value to "00". Dot shaped light on the relevant cooking zone display itself turns off completely after having flashed for a certain period of time and the timer is cancelled. Using induction cooking zones safely and efficiently Operating principles: Induction hob heats directly the cooking vessel as a feature of its operating principles. Therefore, it has various advantages when compared to other hob types. It operates more efficiently and the hob surface does not heat up. Induction hob is equipped with superior safety systems that will provide you maximum usage safety. Your hob can be equipped with induction cooking zones with a diameter of 145, 180, 210-280 mm depending on the model. With induction feature, each cooking zone detects each vessel placed on them. Energy builds up only where the vessel contacts with the cooking zone and thus, minimum energy consumption is achieved. Operation time constraints The hob control is equipped with an operation time limit. When one or more cooking zones are left on, the cooking zone will automatically be deactivated after a certain period of time (see Table-1). If there is a timer assigned to the cooking zone, the timer display will also turn off later. Operation time limit depends on the selected temperature level. Maximum operation time is applied at this temperature level. The cooking zone may be restarted by the user after it is turned off automatically as described above. Table-1: Operation time limits Temperature level Operation time limit - hour 0 0 1 6 2 6 3 5 4 5 5 4 6 1,5 7 1 .5 8 1.5 9 20 minutes P (Booster) 5 minutes (-) (1The hob will drop to level 9 after 5 minutes Overheating protection Your hob is equipped with some sensors ensuring protection against overheating. Following may be observed in case of overheating: • Active cooking zone may be turned off. • Selected level may drop. However, this condition cannot be seen on the indicator. Overflow safety system Your hob is equipped with overflow safety system. If there is any overflow that spills onto the control panel, system will cut the power connection immediately and turn off your hob. "F" warning appears on display during this period. 1 9/EN