Beko HRZG64120 User Manual - Page 14
procedure.
![]() |
View all Beko HRZG64120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
• Make sure that the natural gas valve is readily accessible. • If you need to use your product later with a different type of gas, you must consult the Authorised Service Agent for the related conversion procedure. Installing the product 1. Remove burners, burner caps and grills on the hob from the product. Turning the hob upside down, place it on a flat surface. 2. In order to avoid the foreign substances and liquids penetrate between the hob and the counter, please apply the putty supplied in the package on the contours of the lower housing of the hob but make sure that the putty does not overlap. When installing the hob onto a cabinet, a shelf must be installed in order to separate the cabinet from the hob as illustrated in the above figure. This is not required when installing onto a built-under oven. For example, if it is possible to touch the bottom of the product since it is installed onto a drawer, this section must be covered with a wooden plate. min. 15 mm Rear view (connection holes) 3. Turning the hob again, align and place it on the counter. 4. You can secure your hob to the counter by using the clamp and the screws supplied. 23 1 Hob 2 Screw 3 Installation clamp 4 Counter Place the burner plates, burner plate caps and grills back to their seating after installation. Making connections to different holes is not a good practice in terms of safety since it can damage the gas and electrical system. Final check 1. Open gas supply. 2. Check gas installations for secure fitting and tightness. 3. Ignite burners and check appearance of the flame. Flame must be blue and have a regular shape. If the flame is yellowish, check if the burner cap is seated securely or clean the burner. 14/EN
![](/manual_guide/products/beko-hrzg64120-user-manual-7d41198/14.png)